These hubs have a tapered bore to be fitted with the standard removable bushes shown on the previous pages. It is very easy to weld or bolt them onto drums, rotors, sprockets, pulleys, etc., as applicable. They must be firmly fastened onto drive or driven shafts.

The dimensions of weld-on hubs are given for information purposes and may be modified without prior notification.

Smooth holes
Code	Stk	€	Bush	A	B	C	D	E	F	G	H	d	Weight
PB1210		32,31	1210	6,35	120	80	100	25,4	75	9	2,5	7,5	0,885
PB1610		39,78	1610	7	130	90	110	25,4	85	9	2,5	7,5	1,060
PB2012		57,14	2012	8	145	115	125	31,8	110	12	2,5	9,5	1,875
PB2517		111,87	2517	9,53	185	130	155	44,5	125	18	2,5	11,5	3,60
PB3020		195,73	3020	12,7	220	165	190	50,8	160	19	2,5	13,5	5,85

All smooth-hole plates have 6 fastening holes except for: PB2517 and PB3020: 8 holes.

Threaded holes
Code	Stk	€	Bush	A	B	C	D	E	F	G	H	d	Weight
PB1210M		32,03	1210	9	120	80	100	25	75	10	2,5	M6	0,885
PB1610M		37,88	1610	9	130	90	110	25	85	10	2,5	M6	1,060
PB2012M		59,41	2012	11	145	115	125	32	110	13	2,5	M8	1,875
PB2517M		110,33	2517	14	185	130	155	45	125	20	2,5	M10	3,60
PB3020M		189,91	3020	14	220	165	190	50	160	20	2,5	M 12	5,85

All threaded-hole plates have 6 fastening holes.