Conveyors and Precision Roller Chains
straight plates
European and US standard (ISO and ASA)
Caution, prices written into the "€" column are your discount prices (if you are connected), or the general public prices (if you are not).
Catalog » Conveyors and Precision Roller Chains » CMW chains » Chains with straight plates
- Stocks & prices
- Specs (ISO standard)
- Specs (ASA standard)
These chains are used for transmission as well as light conveying.
| European ISO standard ISO 606 - DIN 8187 - BS 228 - NF E 26 102
|
|||||||||
| ISO standard | Pitch (P) | Chains |  |
Spare parts | |||||
| Link connection (C ou D) |
|||||||||
| Inch | mm | Code | Stk | € | Code | Stk | € | ||
| STEEL | |||||||||
| 06B-1 | 3/8" | 9,52 |  |
||||||
| 08B-1 | 1/2" | 12,7 | |||||||
| 10B-1 | 5/8" | 15,8 | |||||||
| 12B-1 | 3/4" | 19,05 | |||||||
| 16B-1 | 1" | 25,4 | |||||||
| 20B-1 | 1"1/4 | 31,75 | |||||||
| 24B-1 | 1"1/2 | 38,10 | |||||||
| 28B-1 | 1"3/4 | 44,45 | |||||||
| 32B-1 | 2" | 50,8 | |||||||
| STAINLESS STEEL (Breaking loads 30% below those of steel chains)
|
|||||||||
| 06B-1 | 3/8" | 9,52 |  |
||||||
| 08B-1 | 1/2" | 12,7 | |||||||
| 10B-1 | 5/8" | 15,8 | |||||||
| 12B-1 | 3/4" | 19,05 | |||||||
| 16B-1 | 1" | 25,4 | |||||||
| US ASA standard ISO 606 - DIN 8188 - ANSI B29-1 - NF E 26 102
|
|||||||||
| ASA standard | Pitch (P) | Chains | |
Spare parts | |||||
| Link connection (C ou D) |
|||||||||
| Inch | mm | Code | Stk | € | Code | Stk | € | ||
| STEEL | |||||||||
| 20A-1 | 1" 1/4 | 31,75 | |
||||||
| 24A-1 | 1" 1/2 | 38,10 | |||||||
| 28A-1 | 1" 3/4 | 44,45 | |||||||
| 32A-1 | 2" | 50,8 | |||||||
| Dimensional specifications – ISO chains with straight plates | ||||||||||||||
| ISO Standard |
PITCH (P) |
Inside width E | Link width | Roller dia- meter |
Pin dia- meter |
Max. plate height | Inside plate thick- ness |
Outer plate thick- ness |
Width over rivets | Max. width | Working surface | Breaking load | Net weight | |
| Inch | mm | L | L1 | D1 | D6 | H | S | S1 | F1 | 1/2F1 +F2 | (mm²) | (daN) | (Kg/ml) | |
| 06B-1 | 3/8" | 9,52 | 5,72 | 8,53 | 6,35 | 3,28 | 8,4 | 1,20 | 1,00 | 13,5 | 16,8 | 28 | 1080 | 0,4 |
| 08B-1 | 1/2" | 12,7 | 7,75 | 11,30 | 8,51 | 4,45 | 11,5 | 1,60 | 1,60 | 17,0 | 20,9 | 50 | 1 950 | 0,8 |
| 10B-1 | 5/8" | 15,8 | 9,65 | 13,28 | 10,16 | 5,08 | 14,2 | 1,60 | 1,60 | 19,6 | 23,7 | 67 | 2 790 | 1,0 |
| 12B-1 | 3/4" | 19,05 | 11,68 | 15,62 | 12,07 | 5,72 | 15,8 | 1,80 | 1,80 | 22,7 | 27,3 | 89 | 3 220 | 1,3 |
| 16B-1 | 1" | 25,4 | 17,02 | 25,40 | 15,88 | 8,28 | 21,0 (*) | 3,50 | 3,00 | 36,1 | 41,5 | 210 | 7 280 | 3,0 |
| 20B-1 | 1" 1/4 | 31,75 | 19,56 | 29,00 | 19,05 | 10,19 | 26,0 | 4,50 | 3,50 | 41,2 | 46,0 | 296 | 10 670 | 4,1 |
| 24B-1 | 1" 1/2 | 38,10 | 25,40 | 37,90 | 25,40 | 14,63 | 33,0 | 6,00 | 5,00 | 53,4 | 58,5 | 554 | 17 800 | 7,9 |
| 28B-1 | 1" 3/4 | 44,45 | 30, 99 | 46,50 | 27,94 | 15,90 | 36,6 | 7,00 | 6,00 | 65,0 | 69,6 | 739 | 22 200 | 9,5 |
| 32B-1 | 2" | 50,8 | 30, 99 | 45,50 | 29,21 | 17,81 | 41,8 | 7,00 | 6,00 | 65,2 | 73,1 | 810 | 27 750 | 10,6 |
(*) for the 16B-1 chain with a pitch of 25.4 mm, there are two possible plate heights: 21 and 24 mm
| Dimensional specifications – ASA chains | ||||||||||||||
| Single chains | ||||||||||||||
| Standard | Pitch (P) | Inside width | Outer width | Ø roller | Ø Pin | Max. plate height | Inside plate thickness | Outer plate thickness | Width over rivets | Max. width | Working surface | Breaking load | Net weight | |
| ASA | ANSI | (mm) | L | L1 | D1 | D6 | H | S | S1 | F1 | 1/2F1 + F2 | (mm²) | (daN) | (kg/ml) |
| 06A-1 | 35 | 9,52 | 4,77 | 7,23 | 5,08 | 3,58 | 8,80 | 1,20 | 1,20 | 12,0 | 13,3 | 26 | 1 080 | 0,39 |
| 08A-1 | 40 | 12,7 | 7,85 | 11,15 | 7,95 | 3,96 | 12,0 | 1,60 | 1,60 | 17,8 | 21,7 | 44 | 1 750 | 0,6 |
| 10A-1 | 50 | 15,8 | 9,40 | 13,80 | 10,16 | 5,08 | 15,0 | 2,00 | 2,00 | 21,8 | 25,9 | 70 | 2 940 | 1,0 |
| 12A-1 | 60 | 19,05 | 12,57 | 17,70 | 11,91 | 5,94 | 18,0 | 2,40 | 2,40 | 26,9 | 31,5 | 105 | 4 150 | 1,5 |
| 16A-1 | 80 | 25,4 | 15,75 | 22,40 | 15,85 | 7,92 | 23,6 | 3,00 | 3,00 | 33,0 | 35,0 | 178 | 6 940 | 2,6 |
| 20A-1 | 100 | 31,75 | 18,90 | 27,40 | 19,05 | 9,53 | 29,4 | 4,00 | 4,00 | 40,5 | 45,2 | 261 | 10 920 | 4,0 |
| 24A-1 | 120 | 38,10 | 25,22 | 35,30 | 22,23 | 11,10 | 35,0 | 5,00 | 5,00 | 50,8 | 55,5 | 392 | 15 630 | 6,0 |
| 28A-1 | 140 | 44,45 | 25,22 | 37,00 | 25,40 | 12,70 | 41,0 | 5,50 | 5,50 | 54,7 | 59,3 | 470 | 21 200 | 7,0 |
| 32A-1 | 160 | 50,8 | 31,55 | 45,00 | 28,58 | 14,27 | 47,0 | 6,50 | 6,50 | 65,5 | 69,6 | 642 | 27 890 | 10,0 |
| 40A-1 | 200 | 63,5 | 37,85 | 54,70 | 39,68 | 19,84 | 59,0 | 8,00 | 8,00 | 79,6 | 85,4 | 1085 | 43 160 | 16,6 |
| 48A-1 | 240 | 76,2 | 47,35 | 67,50 | 47,63 | 23,80 | 70,0 | 9,50 | 9,50 | 95,5 | 103,1 | 1607 | 62 250 | 22,6 |
| Double chains | ||||||
| Norme ASA | Entre denture | Largeur sur rivets | Largeur maxi. | Surface de travail | Force de rupture | Poids net |
| E | F1 | 1/2F1 + F | mm² | (daN) | (kg/ml) | |
| 06A-2 | 10,13 | 22,1 | 23,45 | 53,48 | 1 970 | 0,76 |
| 08A-2 | 14,38 | 32,3 | 36,2 | 88,0 | 3 590 | 1,2 |
| 10A-2 | 18,11 | 39,9 | 44,0 | 140,0 | 5 810 | 1,9 |
| 12A-2 | 22,78 | 49,8 | 44,4 | 210,0 | 8 210 | 2,9 |
| 16A-2 | 29,29 | 62,7 | 66,0 | 356,0 | 14 180 | 5,0 |
| 20A-2 | 35,76 | 76,4 | 81,2 | 522,0 | 21 940 | 7,9 |
| 24A-2 | 45,44 | 96,3 | 100,9 | 784,0 | 31 490 | 11,8 |
| 28A-2 | 48,87 | 102,8 | 108,2 | 940,0 | 42 750 | 13,8 |
| 32A-2 | 58,55 | 124,0 | 128,2 | 1284,0 | 56 240 | 19,9 |
| 40A-2 | 71,55 | 151,0 | 157,0 | 2170,0 | 87 740 | 33,0 |
| 48A-2 | 87,83 | 183,0 | 191,0 | 3213,0 | 125 530 | 44,0 |
| Triple chains | ||||||
| 12A-3 | 22,78 | 72,6 | 77,2 | 315 | 11 110 | 4,3 |
| 16A-3 | 29,29 | 90,5 | 95,0 | 535 | 19 840 | 7,5 |
| 20A-3 | 35,76 | 112,2 | 117,2 | 783 | 30 960 | 11,9 |
| 24A-3 | 45,44 | 141,0 | 146,4 | 1176 | 43 720 | 17,6 |
| 28A-3 | 48,87 | 151,8 | 157,0 | 1410 | 59 330 | 20,7 |
| 32A-3 | 58,55 | 182,0 | 186,7 | 1926 | 78 060 | 29,7 |
| 40A-3 | 71,55 | 222,7 | 228,5 | 3256 | 121 780 | 43,3 |
| 48A-3 | 87,83 | 271,0 | 278,8 | 4820 | 175 650 | 66,0 |
| Dimensional specifications – ASA chains | ||||||||||||||
| Single chains | ||||||||||||||
| Standard | Pitch (P) | Inside width | Outer width | Ø roller | Ø Pin | Max. plate height | Inside plate thickness | Outer plate thickness | Width over rivets | Max. width | Working surface | Breaking load | Net weight | |
| ASA | ANSI | (mm) | L | L1 | D1 | D6 | H | S | S1 | F1 | 1/2F1 + F2 | (mm²) | (daN) | (kg/ml) |
| 12A-1 | 60H | 19,05 | 12,70 | 19,43 | 11,91 | 5,94 | 17,5 | 3,2 | 3,2 | 29,1 | 30,9 | 114 | 4 270 | 1,7 |
| 16A-1 | 80H | 25,4 | 15,75 | 24,40 | 15,85 | 7,92 | 23,6 | 4,0 | 4,0 | 37,0 | 39,5 | 192 | 7 140 | 3,0 |
| 20A-1 | 100H | 31,75 | 19,05 | 29,06 | 19,05 | 9,55 | 29,6 | 4,8 | 4,8 | 43,6 | 47,2 | 282 | 11 240 | 4,4 |