Synchronous Twin Power® belts

L Series

L0203 - L0660

Caution, prices written into the "€" column are your discount prices (if you are connected), or the general public prices (if you are not).

Catalog » Gates Synchronous Belts » Gates Twin Power® CTB belts » L Type » L0203 - L0660

Stocks & prices
Specifications
Diagram

• The code's ultimate letter (G) corresponds to the manufacturer's identification letter.

• The sleeves that correspond to the belts whose references start by MANL...

• Material: Neoprene.

• High loading capacity.

• The Twin Power® belt can either transmit up to 100% of its maximum load from one side of the belt, or a fraction of this load on either side, provided the sum of the loads does not exceed the maximum capacity.

• Non-slip positive drive. • Runs at low noise.

• Lubrication and maintenance-free.

TP L section pitch is 3/8 inch
Code	Stk	€	Discount code	Prim. length (mm)	Nb of teeth
MANL-0203DDG				514,4	54
L-0203-050DDG			GA63	514,4	54
L-0203-075DDG			GA63
L-0203-100DDG			GA63
MANL-0210DDG				533,4	56
L-0210-050DDG		35,69	GA63	533,4	56
L-0210-075DDG		51,38	GA63
L-0210-100DDG		65,75	GA63
MANL-0225DDG				571,5	60
L-0225-050DDG		36,80	GA63	571,5	60
L-0225-075DDG		52,61	GA63
L-0225-100DDG		67,59	GA63
MANL-0240DDG				609,6	64
L-0240-050DDG		39,07	GA63	609,6	64
L-0240-075DDG		55,59	GA63
L-0240-100DDG		71,16	GA63
MANL-0255DDG				647,7	68
L-0255-050DDG		39,71	GA63	647,7	68
L-0255-075DDG		57,52	GA63
L-0255-100DDG		73,23	GA63
MANL-0270DDG				685,8	72
L-0270-050DDG		41,61	GA63	685,8	72
L-0270-075DDG		60,18	GA63
L-0270-100DDG		76,86	GA63
MANL-0285DDG				723,9	76
L-0285-050DDG		42,80	GA63	723,9	76
L-0285-075DDG		61,74	GA63
L-0285-100DDG		78,81	GA63
MANL-0300DDG				762,0	80
L-0300-050DDG		45,26	GA63	762,0	80
L-0300-075DDG		64,71	GA63
L-0300-100DDG		82,38	GA63
MANL-0323DDG				819,2	86
L-0323-050DDG			GA63	819,2	86
L-0323-075DDG			GA63
L-0323-100DDG			GA63
MANL-0345DDG				876,3	92
L-0345-050DDG		49,18	GA63	876,3	92
L-0345-075DDG		70,41	GA63
L-0345-100DDG		89,73	GA63
MANL-0368DDG				933,5	98
L-0368-050DDG			GA63	933,5	98
L-0368-075DDG			GA63
L-0368-100DDG			GA63
MANL-0390DDG				990,6	104
L-0390-050DDG		54,20	GA63	990,6	104
L-0390-075DDG		77,57	GA63
L-0390-100DDG		99,33	GA63
MANL-0420DDG				1066,8	112
L-0420-050DDG		57,05	GA63	1066,8	112
L-0420-075DDG		82,25	GA63
L-0420-100DDG		104,52	GA63
MANL-0450DDG				1143,0	120
L-0450-050DDG		60,05	GA63	1143,0	120
L-0450-075DDG		86,46	GA63
L-0450-100DDG		110,25	GA63
MANL-0480DDG				1219,2	128
L-0480-050DDG		63,22	GA63	1219,2	128
L-0480-075DDG		90,92	GA63
L-0480-100DDG		116,87	GA63
MANL-0510DDG				1295,4	136
L-0510-050DDG		65,46	GA63	1295,4	136
L-0510-075DDG		94,36	GA63
L-0510-100DDG		120,46	GA63
MANL-0540DDG				1371,6	144
L-0540-050DDG		69,17	GA63	1371,6	144
L-0540-075DDG		100,03	GA63
L-0540-100DDG		126,85	GA63

TP L section pitch is 3/8 inch
Code	Stk	€	Discount code	Prim. length (mm)	Nb of teeth
MANL-0600DDG				1524,0	160
L-0600-050DDG		75,04	GA63	1524,0	160
L-0600-075DDG		108,19	GA63
L-0600-100DDG		139,18	GA63
MANL-0630DDG				1600,2	168
L-0630-050DDG		78,82	GA63	1600,2	168
L-0630-075DDG		113,59	GA63
L-0630-100DDG		146,10	GA63
MANL-0660DDG				1676,4	176
L-0660-050DDG		82,56	GA63	1676,4	176
L-0660-075DDG		118,99	GA63
L-0660-100DDG		153,05	GA63

	XL	L	H
Pitch (inch)	1/5	3/8	1/2
W (mm)	0,508	0,762	1,372
T (mm)	1,27	1,91	2,29

Gates Synchronous Twin Power belts